Skip to content

How to Fix The HP Reverb G2 X570 Setup Fail

CURRENT ISSUE

New G2 owners with an X570 motherboard and possibly new AMD CPU’s are having problems getting the G2 to initialize on setup.

What Seems To Work

  • Initializing the G2 on an Intel-Based PC
    Then reinstall in on the X570 Rig.
  • Deleting the G2 from the Device Manager
    Delete the G2 from within Device Manager.
    Unplug the G2 from your Rig and restart.
    Once started and signed in – plug the G2 back into the Rig.
    (note: you may need to try several USB ports to get activation.)
  • USB-C to GPU
    Plug the USB-C Reverb G2 connector into a GPU USB-C Port.
    (Rather than the MB one.)
  • Use the USB-C to USB-A Converter
    Plug into a USB A port.
  • Is It Plugged In???
    Check and be sure the cable connector on the HMD has “Clicked” when you plugged it in!
    • Ya – common…


Use the following posts to get going quickly!

New VR Users:
How To Conquer The Swap From Oculus To Reverb G2 / G1

Reverb Setup:
How To Nail Your G2 / G1 Setup For The Most Amazing View!

Optimizing Your OS For VR:
How To: DCS World OS Tuning Videos – DIY

Join us on the VR4DCS Discord in the REVERB Channel if you still have questions.

One thought on “How to Fix The HP Reverb G2 X570 Setup Fail Leave a comment

  1. I tried everything I could find online to fix this x570 issue (I have a MSI x570 Carbon Pro). Only a 30$ PCIe >=3.0 USB-C expansion card did the trick. Apparently, the x570 USB-C port can only provide 7 watts of power and it seems the Reverb G2 requires more from the USB port. The PCIe card I bought is able to provide 15 watts.

Leave a Reply

%d bloggers like this: